DiCom Perimeter Monitor

Odalog® Type L2

Simple and Effective Gas Monitoring

The DI-COM is a single point continuous H2S perimeter monitor designed for monitoring and recording low level ambient H2S emissions. Housed within a NEMA 4X weatherproof enclosure, the monitor used advanced OdaLog technology to measure H2S gas concentrations from 5 ppb to 2 ppm, along with wind speed and direction. The system provides continuous 4 to 20 MilliAmp output with real-time updates every 10 minutes, displays data for field viewing and stores the data for later downloading and viewing using the OdaStat software. A wireless link is available for communication to a remote control panel or computer and can accept data from single or multi-point installations.

Battery Life
Data Points
Of the time

Popular Products

Gas Dilution System (GDS)

The Gas Dilution System (GDS) is an easy to use electronic device designed to take a known calibration gas or gas sample and dilute it to lower concentrations. The diluted gas outp [...]

Dry Dock

The OdaLog Dry Dock reduces recovery time for the OdaLog L2 by half. OdaLog gas sensors absorb moisture at the same rate of recovery. The calculation for how long to 'dry' excess m [...]

OdaTrak 4-20mA adapter

The OdaTrak™ 4 to 20mA adapter was primarily designed as an interface between the OdaLog® gas Logger and industrial control systems for the purpose of continuous, real-time opti [...]

7000 MkII

The OdaLog® 7000 MkII multi-gas unit is based on the proven OdaLog® Logger design and had been designed to be a single gas monitor, or to monitor up to 6 gases depending on the c [...]



Looking for an industry leading H2S Data Logger?